4.5.2 Interface IFdtChannelActiveXInformation

Available since FDT 1.2.0.0

Seldom implemented by:
Never implemented by:

Usually an FdtChannel does not have a user-interface, but in case of communication channelsit may be required to have one. Depending on the fieldbus protocol and the capability of the communication channel it might be necessary to implement a user interface to configure the communication itself. For example, if a hardware driver is included, parameters like selected COM port or interrupt addresses must be set by the user. These data are encapsulated within the communication channel and can only be configured by a gateway specific user-interface